Quote:
|
Originally Posted by cestria Looking into the limb pockets I can see an oblong shaped metal socket and the adjusting screw, the limbs seem to go all the way home, with the sprung pin in the right place, but grabing the limb tips and moving them in the direction of the shot I get a lot of movement at the limb base. Help please. |
The bottom edge of the limbs should have a semi-circular (ish) cut out and about 3 inches towards the tips a metal skirted spung pin. If this is the case they will suit the riser you have
If I understand correctly, the tips move forward, but not backward..... The tension of the string will hold the limbs in place.
I'm not sure how much movement should be normal on a GM - there may or may not be a method of adjusting the limb pockets for weight/tiller - which will change the amount of movement you see.
T.