| I had this problem on both of my hoyts in the past, most ideal scenario is that the peep and d-loop line up in the correct orientation pointing directly away from the riser.
When drawn the string shouldn't twist and the d-loop should pull the string in it's neutral position so the peep should still be pointing the same way.
It took ages on both Hoyts to get this bedded in and even then it soon bedded out again.
You'll need: tons of patience, a string seperator, practice target, lots of patience, to shoot lots of arrows, plenty of d-loop material, a lighter, pliers oh and did i mention the patience bit?
My mathews hasn't been a problem at all.
Good luck! |