| Dont forget to remove the locking screw if there is one, then wind the allen key clockwise (if you are looking at the riser if you were shooting it) this should move the pocket towards you.
Count the number of turns and do the same to the other pocket, then DONT FORGET TO CHECK AND RE SET THE TILLER, dont just rely on the same number of turns.
Finally you will need to check both your bracing height and your nocking point. They may have moved but not much.
Dont be frightened about doing it its easier than you think.
__________________
"You're about as useful as a poopy flavored lollipop" |