Thread: Brace height
View Single Post
  #2 (permalink)  
Old 11-04-07, 09:42 AM
buzz lite beer's Avatar
buzz lite beer buzz lite beer is offline
It's an X
  • Recurve
  • Compound
  • Traditional
Setup
Riser: Nexus
Limbs: Winact@45+lb
Sight: Shibuya
Stabilisers: SF
Button: Shibuya
Bow String: BCY '02
Arrows: shiny 2115

Compound Script currently under construction
Traditional Script currently under construction
Join Date: Aug 2006
Location: Durham
Posts: 1,650
Initially that sounds very high, but with myself just acquiring the Nexus using the throat of handle to bow string adds at least 3/8"+ to the brace height over the Matrix and Ex-feel and retaining the same amount of string groove shown from behind the string. Measured from the pressure button the height sounds less dramatic but I still think 3/4" of groove is excessive, every set up I've owned seems to have ran best with a gap between the bottom of the string groove and the bow string of no more than 1/4"
__________________
Gliddy glub gloopy,Nibby nabby noopy,La la la lo lo,
Sabba sibby sabba,Nooby abba nabba,Le le lo lo,
Tooby ooby walla,Nooby abba naba, Early morning singing song
Reply With Quote