Quote:
Originally Posted by mike lepera BRITESITE  When setting the nock point, If you find that you need to make small adjustments to you nock point, you can make finer adjustments by tightening the limb bolts on a comp[ound. the nock point will move towards the bolt that gets tightened. Or it will move away from the bolt that gets loosened.
This is easier than changing the angle on the launcher or trying to slide the nock point  |
Have a look at this link, it gives a lot of useful information on tiller tuning.
http://www.merlin-bows.co.uk/articles/Tiller.pdf
There are a number of useful documents on theis page as well
Technical Sheets
Chris may be getting a bit long in the tooth, but there are few archers, even now, that can match his technical knowledge. And the older amongst us will remember that he was no slouch on the shooting line, field or target.