|
It's ages since I used these, but I used a fletching jig to mark lines on the arrows where the fletchings would be placed. Fix the double sided tape to the lines, making sure the tape is on the same side of every line. Then fix the fletching to the double sided tape. Start at one end and fix that end, then line up the fletching with the line, before pressing the rest of the edge into place. The leading edge is then wrapped in narrow tape to secure the front as it tends to lift otherwise.
Then, turn the nocks until the fletchings look as though they will clear the rest. Check that they do clear with powder. Adjust if necessary.
There could be a more up to date method; as I said, it's ages since I last did this.
|