Quote:
|
I don't have one and have done a static balance check and found the neutral balnce point to be about 1" in front of the riser, on the centre line of the pivot point, which I was led to believe to be close to ideal.
|
The position of the bow balance point in front of the riser is mainly just a function of the weight of the riser - there is no "ideal" position. Dinna worry about it. As above it's the dynamic behaviour of the bow that matters.
Fitting a V bar system without an extender is like fitting bicycle tyres without putting air in them. Your choice - but it doesn't work so well.
