Aha, thanks for clearing this up.
Quote:
Originally Posted by Erika  not all sights can be used that way (i think) |
I think you're right - this is why I haven't been able to figure this out on my own. The extention arm on my sight isn't symmetrical (there are notches along the bottom of the arm, and a corresponding locking ball-bearing in the lower groove of the bracket.
I suppose I could remove the ball-bearing and it would work, but as I understand from the other posts this reversing/inverting the sight isn't something I'd want to do unless it were absolutely necessary? For example, if I had clearance problems with the sight all the way in and the sight block too low?