| Button/plunger question
I'm just about to change my button for a new one. Never really had to mess around the old one as it was set for me.
I've got the Shibuya DX button. On the large nut there's two small holes with the screws inside. Are both these screws for unlocking and then locking the pressure adjuster screw at the end of the button? I don;t want to start messing with the threads.
eg set the position with the first locking nut and then unscrew the two threads on the big nut and adjust the screw at the rear then tighten the two screws in the large nut? |