| I assume it's the arrow passing plate you want to fit....
1. find your material ... (I've got some nice black buffalo horn... if you need some P.M. me and I'll stick some in the post)
2. cut it to shape...
3. clamp it to the bow and mark round it with a very shap Stanley knife....
4. Very gently remove about 2mm of material with a good small sharp chisel
5. tap the passing pate into the recess to check for a tight fit...
6.remove the arrow plate
7 fill the recess with super glue
8 top in the plate
9 when the glue has set .... file and polish
Good luck....
__________________
25.8069758 is the root of all evil
|