| Centre serving?
Hi
The centre serving on my string has worn out. Or, more accurately, the serving on the serving. My string has a centre serving which is the standard length, 7-8 inches I think. Because the arrow knocks are a bit slack the chap who made the string put a very fine serving just below the string knock, of about half an inch. The knocks are 3d, I think. Has this been done because the correct gauge serving material wasn't in stock? The nocks go nicely onto the serving on the string ends.
The problem now, is that the fine serving has worn out after not very much shooting and the arrow knocks are a bit sloppy.
So do I buy another string or buy the tools and some serving and replace it.
Thanks
Kevin |