Thread
:
Spining arrows for TXS
View Single Post
#
9
(
permalink
)
09-05-08, 11:47 PM
Flying Whale
It's an X
Recurve
Compound
Traditional
Setup
Riser:
Elite Synergy XL
Limbs:
Sight:
Shibuya Ultima Carb.
Stabilisers:
Beiter long rod
Button:
Bow String:
Arrows:
Axis FMJ 400
Compound Script currently under construction
Traditional Script currently under construction
Join Date: May 2006
Location: Malvern, Worcs
Posts: 1,224
Quote:
Originally Posted by
Andyakashrek
After rereading my last post I suddenly had a thought. I took off the majesty string and put on a shot in dyneema string with one brass nock and one tied nocking point. I raised the brace height by an 1/8 to 9 1/8". Result. Arrow flight good and arrows in red or better at 60yds.
Presumably the heavier, thicker string has brought the ACC's back into tune as that's all I changed. Funny thing is I was shooting with someone using G3's at #40, #2 heavier than me, same draw length and bow length but using ACE's and I was hitting the boss harder than him with more penetration and flatter trajectory.
Seems I might be on the limit for spine. Indoors is fine but I have struggled with consistency since coming outside this year presumably due to the faster string and increased DL. Still, sorted now.
And no the Borders are not destined for ebay.
Doesn't surprise me.
I got identical sight mark and identical tune from G3's @38# to my TXGs at 32# using ACEs at 100 yards.
Flying Whale
View Public Profile
Find all posts by Flying Whale