Quote:
Originally Posted by sp220  The grains are whatever you set it at.
However - the stainless points are max 110 grains (min 90), whereas the tungsten come as 120 max (min 100)...
The stainless points are also very long.
I much prefer the tungsten points, but thats a personal choice.
Oh, and the 10 grain difference wont affect sight mark on an X10, its too heavy for that. It wont affect a bareshaft test either - 10 grains is tiny.
PS: and shooting the poundage you probably are, you probably dont want to have less than 110 gn anyway. |
you would be surprised at what a 10 grain difference makes, I tested two sets of X10's each with 10 grain difference in point weight, all other aspects were the same (length,fletch.pin nock)there was on average a 12 foot per second difference between the two sets. shooting out of an Apex 7 set at 58llb