Quote:
Originally Posted by sp220  The grains are whatever you set it at.
However - the stainless points are max 110 grains (min 90), whereas the tungsten come as 120 max (min 100)...
The stainless points are also very long.
I much prefer the tungsten points, but thats a personal choice.
Oh, and the 10 grain difference wont affect sight mark on an X10, its too heavy for that. It wont affect a bareshaft test either - 10 grains is tiny.
PS: and shooting the poundage you probably are, you probably dont want to have less than 110 gn anyway. |
The above was your very early contribution to OB's enquiry and initiation of this thread. It is very difficult to see what else you could contribute to the thread after informing us that 10 grain difference will affect neither sight mark or bareshaft. If others agreed with you the thread should have ended there. It has not. How the later contributions corroborate your assertions and opinions must be weighed by each reader.
However, your contribution has continued but I am now confused by your most recent entry. Whilst I might admire your willingness to discuss an issue upon which you know nothing, (Protour !), I fail to make any connection with this thread. Please take this in the best possible way. Hush up now and allow the grown ups to talk. After all, this is not rocket science!