Quote:
Originally Posted by samicko  Could the limbs be removed with the force of two fingers? That seems too loose.
Or could the tiller bolt be too far out? |
Hi Samicko
I've found that I'm able to remove any of the limbs I've had on my helix by just moving the limb butt up and down the dowel about the detent as a pivot point while applying a tiny pulling force on the limbs away from the riser. The limbs I've tried on my riser include, Samick Masters, innos, winex, Kaps etc.
Then again if I go the brute force route, sometimes the limbs would seem impossible to remove, this being true with the samick masters I've tried. I'd say that as long as the limb can hold its own weight without falling off the riser, all is fine.
