Quote:
Originally Posted by sambow  A agree with the previous two on the glueing I will be interested to hear if they hold with hot melt and also if you will be able to screw out the point leaving the HIT in place. |
I treated the point and insert as one, so they were installed and removed as one unit. So screwing out a point is not an option, that requires my torch. So the whole unit is like a standard point for a Navigator or an ACE.
Quote:
Originally Posted by sambow I wasn't aware that Beiter made a knock for the Easton X-Nocks can someone confirm?
Like you I didn't like the "dull" looking blue knocks and I changed to white! Its a shame they don't use a knock that stands out more! |
White vanes and nocks is my favorite, don't like my arrows to look like a tropical bird
The Beiter nock is the Insert nock, Marcus26 gave me this info, so thanks should go to him.
Werner Beiter | Dauchingen | Germany | Products | Nock
The size is 5,19 (AC Super Slim, Axis 0,65 10,000), get the nockbed #2 groove for compound. It can be seen from this datasheet on Beiter nocks.
http://www.wernerbeiter.com/en/infor...s/Nocke_GB.pdf
Only sad thing is the colour options, there is three options as follows:
- flash red
- flash green
- flash orange
No whites so I went with flash red.
/Kenn