[radsbow]

Personally I would not worry too much about the string being aligned with the longrod - mine does not align.#But certainly#align the string#with the limb bolts and a couple of central marks on the limbs.</p>

Place a bit of tape about 25mm from the end of the riser pocket, on the limb (the side facing you as you hold the bow)#and mark the center of the limb on the tape. Do the same with the other limb.</p>

Stand the bow up, by leaning the top limb tip against something (basically trying not to distort the limbs from the side). Now stand back and look at the string - It should follow the#line through the marks that you put on the tape (top and bottom), and through both bolts on the riser (top and bottom).</p>