Quote:
joetapley - 26/9/2005 4:09 PM
Two points worth emphasising.
With a walk back method the pin has to be on (and stay on) centreshot before you start.
Bareshaft tuning needs to be done at around 30 metres to get a sensible result. (18m is too short).
The initial setting of centreshot is only a starting point so don't need to be squinting too much. One diameter for the X7 and maybe half a diameter for the ACC. Centreshot (and then spring) is then adjusted as necessary.
|
Thanks Jo, I think I'm understanding this better
Just to be sure though... When you say the pin should be on the centre shot, would that be with the string aligned to the centre of the limbs the pin is in line with the string.
I've certainly got the ACCs nearer to a full diameter rather than half, so that is something to look at first.
Thanks
Mike