Thread: Nocking Point
View Single Post
  #11 (permalink)  
Old 22-07-06, 01:23 AM
Jerry Tee's Avatar
Jerry Tee Jerry Tee is offline
It's an X
  • Recurve
  • Compound
  • Traditional
Setup
Riser: Revolution
Limbs: 38lb winacts
Sight: Arten Oylimpic
Stabilisers: Clickers, K&K twins
Button: SF
Bow String: 14 strand fast flight
Arrows: 1816
Setup
Bow: Oneida
String & Cables: Stain Steel and fastflight
Sight: AGF Compact
Stabs: Beiter
Scope: Cartel (lense removed)
Launcher/Rest: ZT slim
Arrows: 29" 340 AC Slim's
Release Aid: AF tab
Traditional Script currently under construction
Join Date: May 2005
Location: Suffolk
Posts: 2,168

Affiliations & Declarations (Click Here)
Affiliation:
Club:
Commercial:
Commercial Interest:
GNAS Classification:
IFAA Classification:
AIUK Rankings & Live Shoots (Click Here)
The nocking point should not change with the diameter of the arrow the height of the arrow rest should be changed to center the arrow in line with the center of the button hole. Where you set the nocking point will vary according to the type of bow. I usually end up about 1mm above zero on my Pro Eagle.This gives me a bear shaft position about two inches low at 20 yds.
Reply With Quote