Quote:
|
Originally Posted by geoffretired Not sure about needing to change limbs, that's complicated by the shapes of the cams you have and the one you put in their place. What I can say is, the string and cables will need to be changed. The one cam string goes from bottom to top then on down to the bottom cam again so is roughly twice as long as a twin cam version. Also, the single cam has only one cable so it needs to be stronger than the two from a twin cam. I have converted bows like that before but it was not always successful as the poundage can be way too high or low when it is all fitted back together. Browning could tell you perhaps. |
Geoff, i always look forward to reading your posts, you`re a very knowledgeable person, keep it up
