question on merlin omega cams

[sambow]

On my merlin omega cams there are three different positions that the control cable can attach to on the "inner cam" marked a, b and c. Does anyone know the significance and what the difference would be moving from b to c etc.

[niceguy]

Each set of cams can be used with three different modules to give three draw lengths. As you change the modules you also move to a different post i.e. each module has it's own post A, B or C

[sambow]

Originally Posted by niceguy

Each set of cams can be used with three different modules to give three draw lengths. As you change the modules you also move to a different post i.e. each module has it's own post A, B or C

Now I'm confused. The Merlin Archives http://www.merlin-bows.co.uk/archive...va%20_41.5.pdf
Indicate that each of the three cams have five different modules which individually give half an inch of adjustment each. But make no mention of the three different string settings on the cam. If what you are saying is right wouldn't there need to be either 5 string positions A, B, C, D, E or only 3 different string length modules?

[niceguy]

I'll check my paperwork tonight, you may be right on the number of modules, in which case some are sharing post positions.

[phil_r_58]

Of course you could always ring Chris or Ben and they will only be too happy to help you out with advice.

[Schme1440]

Originally Posted by phil_r_58

Of course you could always ring Chris or Ben and they will only be too happy to help you out with advice.

or send Merlin Archery (Ben's Interchange login) a PM and im sure he will answer your question

[sambow]

Originally Posted by niceguy

I'll check my paperwork tonight, you may be right on the number of modules, in which case some are sharing post positions.

I've found out thanks to a PM to Ben and your right.

Modules OM1 & 2 on C, OM3 and OM4 on B and OM5 on A (For omega cams 1 & 2)

Thanks for your help.