|
28-09-06, 08:21 AM
| |||||
| |||||
| Hoyt Cybertec with Command Cams I'm thinking about buying a second hand Cybertec. Can anyone tell me about this bow and these cams? It is a 2002 model.      |
|
28-09-06, 10:02 AM
| |||||
| |||||
| I have an 03 cybertec with cam & ½ which is a nice bow, its axel to axel is quite short and brace hight is under 7" I think they were developed with a bias towards a 3D/Hunting bow, as my draw length is only 26" this is not an issue and makes for a fairly fast bow, I am afraid I know nothing about those cams, there are better new bows out there but second hand they are good value.
__________________ Paul - Experience > Something you gain when things do not go as you expected. |
|
28-09-06, 10:38 AM
| |||||
| |||||
| Cybertec was built as a bit of a speed bow. If you've got a longish draw length, you may be more comfortable with a longer a2a bow such as the Ultratec. The command cams are good. I know several people who prefer them to the cam & 1/2. If you're interested, I'm about to eBay a 2003 Ultratech, RH, 50-60lb, with Cam & 1/2. It's in good nick - just a few minor chips in the finish of the limbs and the riser is immaculate - but nothing that affects the way it shoots. It's good enough to shoot 1370 anyway. Adam |
|
28-09-06, 12:48 PM
| |||||
| |||||
| Quote:
You have PM |
|
29-09-06, 06:42 PM
| |||||
| |||||
| Looks like I may be changing Bows Shortly that means my Cybertec will be on the market if anyone is interested.
__________________ Paul - Experience > Something you gain when things do not go as you expected. |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
