New Arrows

[buzz lite beer]

To prevent the carbon fibres on carbon/ aluminium carbon arrows splintering just behind the piles, run a little super-glue, nail varnish or similar in this area it fills and smooths any slight gaps that may be protruding.

[Christopher Lee]

Great tip Buzz!

It also works on the rear just ahead of the nock if you're not using any kind of outserts or in-out nocks. Just be sure that the glue or varnish is completely cured (at least 24 hours in a windy place) before re-attaching the nocks as superglue vapours and some solvents will attack and weaken the plastic nocks.

CHEERS!