hoyt gm

[sprunzo]

hi, just got a gmed. put the limbs on and try to adjust one of the pockets and my alen key just rotated, when I looked down into the alen socket it looked worn, so I decided to strip it out, no big deal, on close inspection the parent metal on the head had split in three places due to excessive pressure on increaseing draw weight and decreaseing. anybody know where I can get a new adjustment bolt?cheers

[geoffretired]

Somewhere like Quicks might be able to help. If not, can you take the screw to a place like All Fix or similar?

[cestria]

Hi Sprunzo. I'm not sure about the bolts you require as I've not removed one from my GM, but this may help. I lost one of the locking grub screws which go in on top of the bolts you need, I found one at a good bolt stockist,try the yellow pages. With the bow being American, the thread is 5/16 UNF.

[Bald Eagle]

Hi Cestria, Will I see you tomorrow?? I was going to bring you a 5/16 unf bolt for your G.M. but as you are fixed up I won't bother!!

[cestria]

Hi B.E.
Thanks for the offer of a bolt but it is Sprunzo who needs it.
Regards

[Bald Eagle]

Sorry, my mistake, I'll put it in my tackle box for future failures!!