Sizes please

[indybutts]

Hi folks,could someone tell me what size the "10" scoring zone on a 60cm portsmouth round face for a recurve is please.
While we are at it will you tell me the size of the 10+9 combined also.

thanks

[joetapley]

All the rings on fita target faces are the same width and 10 rings so just divide the face diameter by 20 to get the ring width.

So 60cm face ring width 60/20 = 3cm

diameter of 10 ring therefore 2x3 = 6 cm
diameter of 10 + 9 = 2x(3+3) = 12 cm

[gunmender]

copied from the GNAS Rules of Shooting, it is on their website in pdf format under Rules of Shooting

401. Target Faces

(a) The diameters of the full-size faces are 80cm, 60cm and 40cm.
(b) (i) The 80cm face is described in Rule 300.
(ii) The 60cm and 40cm full-size faces are generally as described for 10-zone faces in
Rule 300. Critical dimensions are:
Zone Diameter (cm)
Zone 60cm face 40cm face Tolerance (mm)
Inner 10 3 2 ±1
Inner Gold 6 4 ±1
Outer Gold 12 8 ±1
Inner Red 18 12 ±1
Outer Red 26 16 ±3
Inner Blue 30 20 ±3
Outer Blue 36 24 ±3
Inner Black 42 28 ±3
Outer Black 48 32 ±3
Inner White 54 36 ±3
Outer White 60 40 ±3