Inside a Release Aid (Carter)

[pwiles1968]

Was changing the trigger spring for a softer one, thought I would take a Photo for the Engineers out there.

Tip - If you are taking one of these apart do it inside a large clear plastic bag, that way you wont loose the little springs when they fly out (as I did )

[Little Miss Purple]

I hope you found all the springs!!

[clickerati]

Love the carpeting!

[pwiles1968]

Originally Posted by Little Miss Purple

I hope you found all the springs!!

No Took some scrap bits apart at work and found a suitable replacement .

Originally Posted by clickerati

Love the carpeting!

It is a towel

[Fox]

If you need any springs, PM me, I have full sets of everything from carter.

I would get rid of all that oil on it though, they work best dry or with a tiny amount of lube on the pivots, that much will just atract dust and clog the mechanism.

[pwiles1968]

Originally Posted by Fox

If you need any springs, PM me, I have full sets of everything from carter.

I would get rid of all that oil on it though, they work best dry or with a tiny amount of lube on the pivots, that much will just atract dust and clog the mechanism.

Thank you very much for the offer I think I am OK, I have the 80 lb one it came with and the one I found is equivalent or slightly lighter that the std one, I also found one I could cut to length to tune the weight somewhere in between if I need.