Beiter Sight Tunnel

[narrowboat]

Was just wondering for those who use a beiter sight what insert do you use,i am going to try a no 14 or 19 in a 12mm

[Stylisht]

10mm, use any with an outline circle and cut the middle bit out.

Just leaves the black sight tunnel - now painted "violet delight" (dulux), with a red "inline" (red circle around the edge of the inside of the sight tunnel).

[Ffish]

8/32 with a #3 orange insert. Desperately trying to get my hands on an orange (or green) #1 insert - no one has them!

[narrowboat]

Originally Posted by Ffish

8/32 with a #3 orange insert. Desperately trying to get my hands on an orange (or green) #1 insert - no one has them!

is that the cross one ,i have a 12mm orange one

[pHz]

i use an 8mm no 6

(there doesnt seem to be a 12mm equivalent though)

unless you chop one out as stylisht says i guess no 12 and no 14 are the closest to an open ring (which is what id personally recommend)

slainte rob

[MINIMike]

It's a 12mm no 12 for me. In red.

I find I don't try to aim to the nth degree when using a relatively open ring but still shoot more accurately.

I've also tried a 14 but prefer the 12.

[its my party and]

Beiter 12mm with a No13 insert mainly use the black one but bright with flouro pin indoors.

[Tarkwin]

no insert used, indoor or out....whichever one I tried I found it led to over aiming..

T.

[Field Archer]

Originally Posted by Tarkwin

no insert used, indoor or out....whichever one I tried I found it led to over aiming..

T.

Same as Tarkwin, just a big hole to look through