Tiller Locking Screw

[waterstar]

I've lost a tiller locking screw from my hoyt matrix. The hole is around 7/16", but I don't know what the thread type is - any ideas?

cheers
John

[Flying Whale]

Originally Posted by waterstar

I've lost a tiller locking screw from my hoyt matrix. The hole is around 7/16", but I don't know what the thread type is - any ideas?

cheers
John

Someone in our club had this problem with a Nexus. The shop that sold it to him (not his local shop) would not help despite it only being about 6 months old.

In the end he contacted Hoyt directly and they sent him 4 so he had some spares.

Nice to see Hoyt doing the right thing, I think the shop could have done better.

If you are still struggling to get one, drop me a PM, and I will ask him exactly where and how he contacted Hoyt

[Desert Archer]

Originally Posted by Flying Whale

In the end he contacted Hoyt directly and they sent him 4 so he had some spares.

Hoyt did the same thing for me with a pair of Vectors.

Dave

[waterstar]

Hi

I tried customerservice and sales @hoyt.com - both bounced. and I cannot see an email address on their web site - so an address would be appreciated

cheers
John

[nath]

If it's 7/16 I think the thread will be "UNF" (fine) as apposed to "UNC" (coarse)

go to a good old fashiond hardware store (the type with little boxes of odds and ends) and you will be looking at a few pence

[Flying Whale]

Originally Posted by waterstar

Hi

I tried customerservice and sales @hoyt.com - both bounced. and I cannot see an email address on their web site - so an address would be appreciated

cheers
John

Just emailed my contact. If I can get details before you find them another way, I will pass them on....

I have a Matrix too, so may be looking to add a spare to my toolkit.

FW

[Desert Archer]

Originally Posted by waterstar

Hi

I tried customerservice and sales @hoyt.com - both bounced. and I cannot see an email address on their web site - so an address would be appreciated

cheers
John

Hoyt does not respond to e-mail. I called their customer service number and got immediate help.

Dave

[waterstar]

Originally Posted by Desert Archer

Hoyt does not respond to e-mail. I called their customer service number and got immediate help.

Dave

Dave Hi
that's ok when you live in Arizona - from the UK the phone call would cost 10 times more than the set screw

However thank you - I'll keep that in mind

[Scooter]

I'll try and chanck my Nexus tonight and see what the screw is. Most likely a U.S. standard thread.

[nath]

Originally Posted by Scooter

I'll try and chanck my Nexus tonight and see what the screw is. Most likely a U.S. standard thread.

yup, as said 7/16 unf grub screw