Knocks

[hyakuhei]

Hey guys,

I have just picked up some nice winex limbs and some a/c/e's.

At the moment I just have a fast flight string with a single brass knocking point.

Im looking at getting some beiter in/out nocks for my arrows as the g-nocks scare me. (I know there is nothing wrong with them, they scare me a little anyway)

Anyway I want to know if I can use the in/out knocks with a normal nocking point, as I havent tuned my new limbs yet and dont want to have to serve on a knocking point.

Also, which size is the right one to get? I assume this is todo with how many strands the string is, but im not sure.

Regards
Rob

[Big Boy Blue]

Rob

The in/out nocks will be fine, just make sure you get the correct size for the string/serving your using.

I would then suggest you tune the bow using masking tape nocks until you get the correct height. Then replace them with dental floss or similar

[Tarkwin]

this page on the beiter site will advise you which nock to use..

http://www.wernerbeiter.com/en/produ...nocksearch.php

once you have selected your nock, you then have to decide on a colour

I have (and do) use the beiter nocks with 'normal' brass nocking points without problems..

iirc, the #1 will suit fast flite/dacron up to about 16 strands + serving...but please don't hold me to that..your best bet is to try the nock on your string before buying...

T.

[wingate_52]

Fit some other nocking points and performance will improve a little.