![]() |
| |||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| |||||
| The problem there is it involves cutting down a 34" ACE longrod, and I like the feel of the 34" one. Hence why I try to get the 6" ones off eBay, because I don't want to cut up my spare twins either... ![]()
__________________ If you make something idiot proof, all that happens is someone builds a better idiot. |
| ||||||||||||||||||||||||||||
| Method 1: Get a 34in off eBay. Chop out 6in, leaving you with 28in. Resell on ebay. Method 2: Get a 34in off eBay. Chop out 6in. Chop remaining bit of ACE in half. Remove important bits from twins. Make 14in twins as an experiment. Sell on ebay for profit ("These were impossible to get hold of and thus very rare", or somesuch). Method 3 - the General Lee approach: Shoot back out of 320 ACE, x4. remove the best 6in you can get hold of. Tape together. Go to hardware store. Epoxy in two bolts purchased from said hardware store. Et Voila. Lateral thinking.
__________________ Heaven doesn't want me, Hell's scared i'll take over | ||||||||||||||||||||||||||||
| |||||
| Quote:
At the moment 34" longrods are going cheaper than 6" extenders and I have enough of the other bits kicking around. (And why is it that every 6" extender on ebay is silver!?!)Stretch |
| |||||
| Quote:
6" extender, 38" Beiter. Had to be 38" because 41" didn't fit in the case...Quote:
![]()
__________________ If you make something idiot proof, all that happens is someone builds a better idiot. |
| |||||
| Quote:
Stretch |
| |||||
| AR$E! ![]()
__________________ If you make something idiot proof, all that happens is someone builds a better idiot. |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|